Frac tanks are large storage tanks used to store liquids and solids. These are considered semi-trailers and can hold 500 barrels of fluid, or 21,000 gallons. The tanks are typically loaded onsite with water or vacuum trucks, and they are heavy enough to be moved by a power-only tractor. Considering the harsh conditions in oil and gas fields, you need a frac tank to handle the pressure. If you are looking to buy these tanks from reliable frac tank manufacturers, consider the following things.
Be sure they meet all federal and state regulations:
They are designed to withstand high temperatures and corrosive fluids. Because they are made to meet these standards, they must also comply with Environmental Protection Agency and Department of Environmental Quality regulations. They can be found in a wide range of sizes and can be used in various industries. They are a great solution for onsite liquid waste storage and are a popular choice for oil and gas sites, chemical facilities, and wastewater treatment facilities.
Look for a manufacturer that is known for providing high-quality products:
When choosing a frac tank, you should look for a manufacturer known for providing high-quality products. Besides being tough, they can handle corrosive fluids and extreme temperatures. Most frac tanks are designed to meet the Environmental Protection Agency (EPA) standards. Whether a temporary or permanent storage solution, these tanks can be the perfect solution for your needs.
Look at the capacity of the tank:
There are many factors to consider when choosing a frac tank. First, look at the capacity of the tank. A larger frac tank will be more expensive than a smaller one, but it can still save you money. It would help if you had a frac tank that can accommodate a large amount of fluid and have a high capacity for high pressure. A 440-barrel frac tank will cost you a little less but will perform the same function as a 500-barrel rig.
Determine what kind of tank is right for the job:
The next step in choosing a frac tank is determining what kind of tank is right for the job. Some oilfields require corrugated-wall tanks, while others will need smooth-walled frac tanks. A frac tank with insulated walls will keep the liquid hot longer, reducing the need to re-heat the tank onsite. Its insulation will also prevent the overpressure of a vapour-tight tank.